Posted on

DIFFERENCE BETWEEN COPPER, BRASS AND BRONZE

DIFFERENCE BETWEEN COPPER, BRASS AND BRONZE

Copper

difference-between-bronze-brass-copper_9ba6b5e91afdd523Copper is utilized in a broad variety of goods due to its superior electrical and warm conductivity, excellent power, excellent formability and stability to corrosion. Tube and pipe parts are usually made of these elements due to their corrosion protection. Both can be easily joined and brazed, and several can be joined by several gas, arc and security systems. They can be bright and polished to virtually any wanted character and luster.

There are forms of Unalloyed Copper, and all can change in a fraction of pollutants that are held. Oxygen-free copper forms are used especially in uses where high conductivity and flexibility are required.

One of the very significant resources of copper is its strength to combat bacteria. After long antimicrobial examination by the Environmental Security Agency, it was decided that 354 copper compounds, containing various alloys, were determined to eliminate more than 99.8% of bacteria within two hours of meeting. Average tarnishing was affirmed not to reduce antimicrobial effectiveness.

 

Applications
Copper is one of the newest metals found.  The Greeks and Catholics moved it into accessories or decorations, and there are also historical articles explaining the use of copper to clean injuries and filter drinking fluids. Now it is most usually located in electrical elements such as wirework due to its capacity to efficiently manage electricity.

 

Brass
Brass is essentially a compound that is made up of copper with zinc combined. Brasses can hold differing quantities of zinc or additional details attached. These different compounds offer a full range of features and contrast in color. Extended numbers of zinc present the element with enhanced toughness and elasticity. Brass can vary in shade of red to yellow that depends on the quantity of zinc attached to the alloy.

  • If the zinc element of the alloy varies from 31% to 38%, it will have raised warm-working capabilities, but the cool-working will be inadequate.
  • If the brass holds over 38% zinc, it could hold a greater power and moderate flexibility.

 

Applications
Brass is generally practiced for ornamental designs originally because of its similarity to gold. It is typically utilized to create musical tools due to its great workability and stability.

 

Other Brass Alloys

Tin Brass
This is a compound that includes copper, zinc, and tin. This combination gathering would involve admiralty brass, naval brass, and available machining alloy. The tin was attached to hinder dezincification in various conditions.

This organization has the weak sensation to dezincification, medium power, large climatic and aqueous corrosion stability and superior electrical conduct. They own excellent hot foreseeability and real cool formability. These compounds are normally utilized to make cables, marine tools, screw engine components, pump rods and corrosion-resistant engineering goods.

Bronze

Bronze is a mixture that holds principally of copper including the extension of additional components. In several examples, the element attached is typically tin, but arsenic, phosphorus along with many other materials can also be utilized to provide separate grounds in the matter. All of these elements create an alloy much durable than copper itself.

Bronze is usually a dull gold color. You can notice the variation within bronze and brass since bronze will hold little rings on its facade.

 

Applications
Bronze is utilized in the development of arts, artistic tools and rewards, and in modern forms such as bushings and applications, where its little alloy on alloy resistance is an improvement. Bronze also has marine uses because of its protection to corrosion.

 

Other Bronze Alloys

Phosphor Bronze
This mixture normally has a tin element varying from 0.4% to .9%, and a phosphorus limit of 0.01% to 0.34%. These compounds are well-known for their power, durability, low coefficient of resistance, high burnout strength, and excellent grain.

The tin compound improves the corrosion stability and tensile strength, while the phosphorous compound enhances the corrosion protection and stiffness. Some common end handles for this produce could be electrical goods, bellows, sources, machines, corrosion opposing equipment.

Aluminum Bronze

This contains an aluminum element array of 5% – 11%, a metal compound of 5% along with a metal content of 5%. Those mixed additives give improved power, linked with superior defense to corrosion and cover. This element is usually employed in the production of marine tools, cover bearings, and pumps or devices that work caustic liquids.

 

Silicon Bronze
main-qimg-6d66687707c2bfd7dcb4c910eda9c440-cThis is a combination that could carry both brass and bronze. They normally
hold 19% zinc and 5% silicon. Red alloy has great durability and corrosion protection and is generally utilized for pipe stalks. Red bronze is related but it produces moderate concentrations of zinc. It is generally handled in the production of pipe and valve parts.

 

Nickel Brass (or Nickel Silver)
This is a metal that holds copper, nickel, along with zinc. The coin presents the matter an around a silver image. This substance has average power and relatively excellent corrosion protection. This element is typically managed to create musical tools, food and drink devices, optical devices, and additional things where the aesthetics are an essential part.

 

Copper Nickel (or Cupronickel)
This is a metal that could hold between from 1% to 29% coin. This element has an enormous corrosion defense and has warm resistance. This element also shows a very large limit to corrosion breaking following stress and oxidation in a cloud or humid air atmosphere. Special nickel element in this matter will have increased corrosion defense in seawater, and protection to aquatic organic fouling. This substance is normally utilized in manufacturing electric goods, marine fittings, valves, taps and ship decks.

Posted on

Why You Should Buy a Torqbar Fidget Spinner

With fidget spinners making a bigger impact than anybody could ever have imagined, it’s time that everybody got up to speed with some of the biggest names in this growing industry. Finger spinners have struck a chord with the public after tackling fidgeting in a way that isn’t disruptive to others. We’re going to look at a premium spinner in this post: the Torqbar.

The Torqbar is looking to take finger spinning to the next level, with a spinner that has top-grade bearings immune to friction. There aren’t many around at the moment, and their exclusivity is much of the appeal for many people. MD Engineering are behind the Torqbar and are leading the way right now when it comes to high-quality spinners.

Because fidget spinners are new on the block, and there aren’t many Torqbars, the demand is by far outstripping the supply – this is leading to some eye-popping developments! The Torqbar is already marketed at between $139 and $199 depending on the metal used – more than any other spinner on sale – but because they are so rare, big-time finger spinners are shelling out twice as much as the asking price to get hold of them. Many of those who have managed to get a Torqbar have uploaded YouTube videos showing the Torqbar in action.

 

All of the Torqbars have the same dimensions and design, but come in four different metals which are all priced separately. The most expensive spinner is the titanium Torqbar, retailing at $199, while the comparatively cheap brass Torqbar is on sale for $139.99. In the middle you have the copper and stainless steel Torqbars, selling at $149.99 and $179.99. What we loved about the Torqbars is that they are beautiful to hold, fitting in the hand nicely and feeling steady at all times – even when spinning at high speed!

The Torqbar goes well both anti-clockwise and clockwise, and can be easily flicked in the opposite direction. Whether you want to spin one way or twiddle backwards and forwards is entirely down to personal preference, but whichever it is, feel safe in the knowledge that it’s far less disruptive than clicking your pen, and far healthier than chewing on your nails.

Premium fidget spinners are usually bought by people who need to be as quiet as possible when they’re spinning. If you work in an office then it’s essential that you aren’t bothering other people while they’re working in what is usually a silent environment. There’s a detectable noise that you’ll hear – because you’re looking out for it – but it’s not loud enough to travel far, so you aren’t going to have any trouble or complaints wherever you choose to spin.
You may be wondering what differences the Torqbars can possibly have which contribute to a $60 price variation in the cheapest to most expensive models. The weight is paramount, with the copper Torqbar weighing twice as much as the titanium Torqbar, which is a remarkably light 31 grams. The stainless steel and brass Torqbars are lighter than the copper model, but not by much, which explains why the titanium Torqbar is pricier than the others. For those wanting a light spinner to carry around, the titanium Torqbar is perfect. Spin times are a bit shorter with the titanium device, although you can still get three minutes with a good spin – triple that of an ordinary spinner! – while the brass spinner boasts a mega four minutes when you get it right.

 

The Torqbar comes in a snug little box to ensure that it’s kept in great condition if you do choose to use it portably. The tight-fitted box is ideal in keeping noise level to a minimum. If you aren’t worried about a few scratches, then you can attach your spinner to your key ring for easy access – it also negates the risk of losing it! You’ll still need to unhook the Torqbar from your key ring if you want to play, but it’s still a cool feature that you don’t get on other spinners!

 

Cleaning fidget spinners is perhaps the only thing that can hold them back at the moment, something that MD Engineering is acutely aware of and is trying to solve. The issue is that even small specks of dirt and lint getting into the bearings causes enough friction to seriously hinder spin time, yet the device is so intricate that it’s difficult to get in there and clean them out.

However, don’t clean your fidget spinner, and this unwanted grittiness could end up damaging your device. Hence, you have to combat it head on whenever you start to hear grinding in the device. While there’s no permanent fix as of now, there are a few things you can do. MD Engineering’s FAQ section that comes with your purchase is well-worded and explanatory, helping you to keep your spinner in perfect shape.

 

Cleaning
The kindest way to clean your fidget spinner is with soapy water as there’s no chance of this being harsh on the spinner or the bearings inside. You may want to add a vinegary product into the water to help release the clogged up dirt. As well as washing, thoroughly drying your Torqbar is vital or you could damage the spinner in the long-term. After patting it dry, apply some sprays of compressed air which can get into the interior of the spinner.

While you’re unlikely to have the time to clean your Torqbar every day, you should do so every time that you can noticeably hear grit. If you spin a lot, then a clean once a week should do the trick, but if you just spin now and again, then once a fortnight should be fine – use your own judgement.

The Torqbar has hinted at what the fidget spinning world could become if it continues to grow as anticipated. Right now, the Torqbar is the best you can buy. If you have the funds and are fascinated by finger spinning, then give serious thought to this MD Engineering special.

Posted on

3D-Printed Spinners: Why You Should Think Twice About Buying One

As with many products, fidget spinners represent the same dilemma: should I buy a cheaper spinner and take my chances, or spend more for a better product that is probably going to last longer? In the fidget spinning dimension, this quandary is represented by the decision you have to make between a 3D-printed finger spinner and a metal or wooden spinner. We’re going to answer that question by taking you through 3D-printed spinners, and explaining why you might be best off avoiding them.

People love 3D-printed finger spinners because they are accessible, come in many cool colors and designs and aren’t going to break the bank. Moreover, there’s no functional difference between a plastic finger spinner and a metal spinner. However, the reality is that 3D-printed plastic fidget spinners are cheap because they are made out of inferior materials which are at best going to require extra maintenance and at worst going to fail.

A good fidget spinner doesn’t get dirty quickly and lose performance. However, 3D-printed plastic spinners seem to be prone to be doing the opposite. Metal spinners aren’t perfect but the accumulation of particles, lint and dirt in 3D-printed plastic spinners is truly staggering – within 20 to 30 minutes of spinning you’ll notice a build-up of dirt and a nasty, gritty sound that’s going to put you of spinning.

The best fidget spinners have tight bearings which spin around easily and smoothly without rattling or getting pulled up by friction. However, since 3D-printed plastic spinners are often independently made, they aren’t crafted with the same quality and this tells with the bearings, which are much looser. This can cause rattling as well as hindering spin times significantly.

 

You may read this and think that you can just clean your fidget spinner whenever it gets dirty and that this won’t be a problem, but remember, cleaning takes a while and isn’t fun – if you’re having to do it often, you may choose not to do it altogether and just leave your spinner to attract even more dust in the cupboard. Meanwhile, a 3D-printed spinner isn’t going to be much use to you if you’re going to be using it somewhere that you need to be silent. They are a little noisy anyway and dirt is only going to increase the grating.

All of that said, if you just want to buy a spinner to see if you’ll like finger spinning, then you can still benefit from a 3D-printed spinner. They’ll allow you to find out what it’s all about and, if you fancy yourself as a bit of a designer, you could also come up with your own colors and patterns to develop a unique, personal fidget spinner.

But if you want to enjoy your time fidget spinning, you’re going to have to stay away from 3D-printed spinners, as they’ll irritate you more than they enthral you. Moreover, if your spinner breaks, you’re going to have to buy another one anyway, adding up your total costs. Hence, why not just take the plunge and invest in a wooden or metal spinner from the start? You won’t regret it.

Posted on

The Fidget Cube: A Kickstarter Project Which Made Millions

Crowdsourcing is one of the most fascinating things to come out of the invention of the internet. With people able to contact others all over the world in a matter of seconds, more like-minded folk with niche interests are coming together than ever before. Antsy Labs’ Matthew and Mark McLachlan have recognized that power more than most with their Kickstarter project, the ‘Fidget Cube’, which soared past its $15,000 target, raking in an astonishing $6.1 million, accumulated by small donations from around 150,000 funders who got firmly behind the idea. So how did the McLachlans come up with a unique product like the Fidget Cube, a handheld which aims to eliminate fidgeting and boredom through a range of gears, switches and rollers?

Keen inventors, the McLachlans have been working on a few products for quite a while but, until the Fidget Cube, failed to attract much attention. The ‘Duet’, a charging block, was the focus of their attention previously, but it couldn’t gain the traction that it needed to.

The Fidget Cube, however, sparked their brains because they had a personal passion for it, and realised how effective and fun it would be. Thinking that if they found it useful, they would too, they set up Antsy Labs in 2015 to get the gears in motion.

 

The reality is that the Fidget Cube was under development three years prior to the registration date but they weren’t convinced enough that it was worth pursuing fully, and as a result, other projects took priority. But it eventually became apparent just how many people found fidgeting to be an issue, and with no specific toy out there to deal with it, they decided to focus more attention on it. The great appeal of the Fidget Cube, they believe, isn’t just that it’s fun for the person using it, but that others aren’t going to be bothered by it.

Despite the McLachlans spotting a gap in the market, they were far from convinced that the Fidget Cube was going to be successful, largely because there was no past evidence to suggest whether it would work or fail. Moreover, because the concept is so bizarre and unique, conveying it to others was difficult, because if you don’t have the fidgeting bug, you just aren’t going to “get it”.

All of those concerns proved to be unfounded, however, with the Fidget Cube ending up being far and away more successful than any of the other projects the brothers had launched on Kickstarter in the past. Once up and online, the Fidget Cube rapidly made it into the limelight, and quickly received the required funding – and then some!

 

Let’s briefly go over the other products that the McLachlans unsuccessfully tried to launch. After the Duet came the Trio, which could charge tablets as well as other devices. A novel idea, perhaps, but the crowdsourcing world can be cruel, and the Trio failed to reach its target and was subsequently scrapped. Keen on hearing the stories of other Kickstarters, the brothers attempted to develop a book, ‘Bright Ideas’, which looked at what it takes to be successful and why some don’t make it. In a nod to the difficulty of Kickstarter, Bright Ideas didn’t make it, nor did Storm the Gate, a table-top game that they also pinned their hopes on.

Anyone who has ever been rejected in life knows that it can be quite a painful thing. When you believe in something or a product, to find that others don’t share that passion can be frustrating and disappointing. However, the hallmark of a real inventor is the ability to come back and try again with something new and exciting that strikes it lucky.

Interestingly, the brothers commented that having a successful Kickstarter launch goes way beyond the product itself – you have to know how and when to market it. They learned the harsh lessons of this with the Trio, which would have sold well as a gift. But by launching it during the holiday season, they were asking investors to spend money on a product that wasn’t going to be ready for that holiday. Immediately, you’re set back and limited on the number of investors you could hope to attract.

The McLachlans hoped for $15,000 for the Fidget Cube, not enough to thoroughly fund its development, but enough to help relieve the pressure and give them the financial boost needed to get the product off paper and into reality. While prepared to put some of their money own, they didn’t need to after the Fidget Cube exceeded its goal by more than 4000%.

 

The Antsy Labs owners found that the Fidget Cube’s Kickstarter run was going to be totally different to any previous product they had attempted to get funded. Just four days after going online, the Fidget Cube had hit the $100,000 market, but that was only just the beginning. The key to this product’s phenomenal success was its social media presence, which was made possible by NowThis Futures, a Facebook page with a huge following in excess of two million. With that many people introduced to the product free of charge, there was always going to be one result. Many of those two million began sharing it to others, who in turn shared it to even more, and the viral boost soon brought the dollars racking in.

With 150,000 funders, it’s clear that the Fidget Cube was made possible on the back of many small investments rather than just a few big ones. Thousands of the tens of millions who saw the video on NowThis Futures put their hard-earned cash in, and now it’s up for the McLachlans to carry that passion and positivity forward and produce a product that’s going to sell to the masses.
The Fidget Cube is already under development and the Antsy Labs team plan on taking the product global as soon as possible. The holiday season was the brothers’ initial target, and they managed to meet it with the product going on sale just in time for people to get an extra toy for their Christmas stocking.

 

The early investors were the ones who had their faith repaid first, with the Fidget Cube going out in December, just before the 2016 Holidays. Those who didn’t chip in quickly enough won’t get their fidget cubes until March, but with the sheer number of products to develop, that’s still a quick turnaround and testament to the dedication that the McLachlans have.

The way they see it, why move too quickly and develop a product that isn’t going to do those who have believed in them justice? They think it better to wait and get things just right than rush and produce something inferior, especially when it’s not going to take long to get the Fidget Cube out there anyway.

The challenge now is to take the Fidget Cube from an idea to a device that the wider world can identify with and get behind. According to the brothers, retailers are already lining up to sell the Fidget Cube and a patent is pending. Everything looks to be in place for the McLachlans to make millions, and it’ll sure be interesting to track their progress and future work.

 

 

Posted on

Why Finger Spinner Bearings are Crucial to a Spinner’s Success

It’s all in the bearings. However a fidget spinner may look externally, and however heavy it may be, what really determines how well one will work is whether it has the proper bearings. There are a few types of bearings in fidget spinners that are organized in various ways, so let’s look at the most popular ones and find out how they work. We also investigated the impact that the bearings have on the spin time of your fidget spinner.

The number of bearings in a fidget spinner will directly affect how well and how long your fidget spinner will spin for. The fewer bearings you have in your spinner, the harder it is for them to effortlessly rotate, and hence there’s a build-up of friction that will lead them to slow down and stop. Too many bearings though and friction could also be created. Ultimately, friction is always going to be a problem to come degree, so ensuring that your spinner is clean and lubricated is important.

In addition, the material of your finger spinner is going to affect the spin time that you’re getting. Cheap ABS plastic spinners aren’t balanced enough to give you more than 60 seconds of spinning, but a metal spinner such as the Rotablade Stubby can triple if not quadruple that. Although even with those, you’ll still have to keep your spinner clean!

There are two main types of finger spinner bearings: ceramic bearings and ball bearings. After some experimentation, we concluded that the ceramic bearings were the best for a few reasons. Firstly, the ceramic bearings contributed to a freely spinning spinner that didn’t pick up dirt and dust as much as the ball bearings did. Moreover, the ball bearings were a bit more susceptible to friction.

 

Much depends on having good finger pads on your spinner, as these will allow you to fit the spinner steadily between your fingers so it doesn’t get off balance. Furthermore, the design of the spinner is important. A compact design will not leave the bearings on show, hence reducing the chance of dirt getting in.

Smooth bearings also contribute to quietness while spinning, which is why the more expensive, better crafted finger spinners – like the praised Torqbar – cost more. Hence, if you do make the decision to invest in a high-end finger spinner, you’re going to have the best bearings, organized in an appropriate way to maximize the spinning potential.
We briefly mentioned the dirt that can accumulate, and while all finger spinners are going to have some problems with becoming gritty and slowing down, the best spinners aren’t going to cause you as many issues. Protecting the bearings should be your primary concern when cleaning the device, so whether you choose to apply an alcohol-based spray or soak your spinner, be sure that whatever you’re cleaning with isn’t corrosive and won’t damage your bearings, as there’s no way of fixing them if you break them.

Hopefully this has enlightened you on bearings, and will help you to make an informed decision when you buy.

 

Posted on

What’s Behind the Phenomenal Fidget Spinner Boom?

Getting bored has more consequences than simply not knowing what to do. To fill the time, you may either start smoking, eat snacks that you really don’t need or chew your nails to help get you through those boring minutes and hours. If you’re not doing yourself harm, you’ll probably be getting on somebody else’s nerves by tapping on a table or furiously clicking your pen. Get the picture? Boredom results in other negative emotions and actions, which need to be stamped out. And now, with fidget toys, they can be!

The fidget toy journey has been wildly unpredictable and testament to just how powerful the internet is. Without it, there’s no way that 150,000 people from all over the world would have been able to come together to raise over $6 million to get a toy, solely designed to quell fidgeting urges, from a brainstorm into reality. It was Antsy Labs, and the work of Matthew and Mark McLachlan which made the Fidget Cube possible, and when they launch
ed the idea on Kickstarter hoping to raise $15,000, it simply exploded. Now, we have people independently making fidget spinners and selling them on their Etsy stores, along with more official companies designing and engineering stunning spinners – the Torqbar and the Rotablade Stubby are two of the best.

Fidget spinners are immensely popular because they are simple, no-frills fun. As well as fitting comfortably in between your fingers, never in danger of slipping out, they can spin for minutes with a simple flick, and can be alternated clockwise and anti-clockwise with minimal work. A metal spinner will easily whizz around for two minutes or more, while a 3D-printed plastic spinner can be purchased in jazzy colors. And, if you really want class, you could go for a wonderfully-crafted wooden finger spinner.

 

What Impressed Us
Finger spinners are so unusual that when you introduce them to somebody for the first time, they may just think that you’re a bit crazy. But once you show them how they work and allow them to have a play, they’ll soon get the buzz and understand just why they’re addictive and sweeping the nation. Never has a toy which does so little been so popular!

It’s hard to know at this point what fidget spinners are good for as no one has had the time to conduct any extensive research to glean from. But another of the internet’s strengths is the wealth of anecdotal information, and there sure is a lot of it with fidget spinners. Many who have played have opined on how fidget spinners and cubes are helping them deal with bad habits along with stress and tension.

Nail-biting is a thing of the past with finger spinners, as is that pesky chocolate bar or caffeine-laden cup of coffee that you’d make out of sheer boredom. However, amazingly for a toy, concentration levels aren’t hit, if anything they may be increased! Because you can play with a fidget spinner in one hand, you can keep working with the other, and some say that the quiet but ever-present whirring actually helps them focus.

Despite there being a dedicated and intense community, fidget spinners are still unusual and if you pull one out around others you’ll definitely have people talking. Someone who’s never seen one wouldn’t have a clue what they do, but find somebody who has, and you’ll immediately be able to start up a conversation with somebody, share tips and perhaps learn about spinners you haven’t purchased or heard of yet. There are many designs – from dual-bars to quad-bars – on sale and it’s always great to expand your knowledge and perhaps even increase your fidget spinner collection.

While there are no guarantees that fidget spinners are going to crack down on your bad habits – ultimately, much will still come down to will power – people are definitely finding that they help, as they are flying off the online shelves! If you’re apprehensive, start off with a cheaper 3D-printed plastic spinner to get involved, or just dive right in with a premium spinner. It’s up to you how you play it.

 

What We Aren’t so Keen On

There are many out there right now who are just trying to make a quick buck and producing fidget spinners that really are not worth your cash – this is mainly apparent with the 3D-printed finger spinners on sale. Many of these aren’t very durable as they get dirty quickly, slowing down the bearings and severely limiting the fun that you can get out of your spinner. While it is indeed possible to lubricate them and get them back to a decent level, you’ll never recapture the initial spin-time, nor will you have the patient to clean your spinner with every 20 minutes or so of use. Moreover, dirt and lint accumulation results in unwanted noise, so if you’ve gone for a cheap spinner with the intention of being discreet, you’re out of luck.

If you do intend on persisting with cleaning your spinner then you can either do it by soaking it in warm water with an acidic substance like vinegar or lime juice, or by carefully applying alcohol. Whichever method you opt for, the drying is as important as the washing, so make sure that you thoroughly rub it dry and fire some compressed air into the bearings to keep the internals in good condition too.

Now, if you consider yourself a bit of a fixer, then you’re likely thinking about how you can stop spinners from picking up dirt and slowing down at all. If you have the answer, you could probably make a lot of money as, so far at least, nobody has come up with the solution. Interestingly, where you use your spinner doesn’t seem to result in more or less dirt, it’s purely down to the spinner that you use. A cheap spinner will pick up the particles, whereas a better one will be more effective at keeping them out. Hence, as with any product, extensively check out the reviews before you buy, and be prepared to spend for quality.

Premium spinners are a rarity right now, but Torqbar and Rotablade are leading the game with great spinners that deliver on the quietness many claim to. These are pricey and aren’t immune to dirt – so clean them as instructed to, otherwise you’ll run the risk of ruining the bearings – but they definitely work a lot better than plastic spinners. At $199, the Torqbar is a serious investment, but thankfully, there is a good middle ground that will offer you a balance of quality and affordability.

Wooden spinners are your friend if you’re in that boat. Depending on your taste, they’re arguably prettier than metal spinners. Also, while you shouldn’t be going for a 3D-printed spinner if you want a long-term pick, they’re a good short-term tie-over. If you love finger spinning, you’ll know that it’s better to have as spinner than to not have one at all!

As well as beating the boredom bug, stress and anxiety are two other key problems that fidget spinners set out to address, but if you don’t have the right spinner, they may end up accentuating those feelings rather than calming them down. We’ve talked about how grittiness affects your spinner’s ability to spin, and while you should reg
ularly check that dirt isn’t building up too much – an excess of friction will just damage your bearings – don’t focus on it 24/7 otherwise you’ll be too caught up with your finger spinner’s performance rather than enjoying it. This could really be an issue if you’ve paid a lot for a spinner and think it’s letting you down – but, quite simply, fidget spinners are what they are, and there’s only so much you can do right now.

 

Summing Up
Finger spinners may initially be a tricky sell, but once you can get them in the hands, or fingers rather, of your target audience, your work is done! The vast majority who have played with them not only like them, but have found them to be beneficial in nipping bad habits in the bud.

We also discovered that the wooden and metal spinners were the most popular, with the extra spin times and classier designs proving to be winners, while plastic spinners received initial praise before the problems became apparent. What we can be sure of is that finger spinners have broad appeal and are going to get bigger and bigger in the near future.

 

Posted on

Why the Rotablade Stubby is Such a Popular Fidget Spinner

There have been many toys over the years designed at hitting stress head on. We’ve had stress balls, Rubik’s cubes and Newton’s cradles. Now we have something new to top all of them: finger spinners. Developed to be a time-passer and stress-tackler, fidget spinners have rocketed to prominence since going on sale in mid-2016. The Rotablade Stubby is looking to change the game, with ultimate quality at less of a cost. Here’s how it stands up.

Making waves right now is MD Engineering’s Torqbar, but with few of them on sale and at a huge $199, many are looking elsewhere to satiate their fidgeting needs. That’s why the Rotablade Stubby from EME Tools is proving popular – it rivals if not matches the Torqbar in terms of quality and has developed a huge fan following, having been released earlier than many fidget spinners on sale. The Rotablade Stubby is loved for its sturdiness and massive spin-time, as well as being a smooth, aesthetically delightful device that you’ll be proud to own.

Rotablade are about as far away from the new kid on the block as you can get with fidget spinning, with EME Tools having developed a few products which have achieved success. But the Stubby is the model which has performed the best with consumers, and it’s easy to see why. The four metals all offer something different and, while the titanium Stubby is sold at $135, the copper, stainless steel and brass Stubbys have shaved off almost $20, retailing at an impressive $116. Fidget spinners of this quality are far superior to cheaper models thanks to the ergonomic finger pads which make the Stubby feel rock solid between your fingers, even when you choose to spin it at rapid speeds. Why would you want to spend over $100 on a finger spinner? You will only really know once you’ve played with one, but consider that they’ll cut down on your boredom significantly and help eliminate any bad habits that you’ve picked up over the years. Think not so much of what you’re getting from, but what the spinner helps prevent.

 

The Rotablade Stubby is very small but it is also quite dense – the titanium Stubby is significantly lighter than its counterparts though, weighing 45 grams. The copper spinner is heaviest at 79 grams, while the brass and steel spinners weigh slightly less than the copper spinner. What’s the benefit of having a slightly heavier metal spinner than a plastic or wooden one? For one, the extra weight helps the Stubby to stay in your hand, with your fingers firmly gripping to the grooves. The equal weighting throughout the model also contributes to long spin-times that are unreachable with cheaper spinners – two, three, four even five minutes of spinning is a reality with the Stubby once you’ve perfected your spinning art!

Maintaining your Stubby is made easy with the lovely screw-cap tin that it comes in. Not only does it look attractive, combining beautifully with the Stubby’s design and color, it’s effective too. The close fit ensures the Stubby doesn’t rattle inside the box and pick up marks. Not everybody is keen on the finger pads that come with the Stubby, but the seller offers copper pads which may be more comfortable on your hands. Also unique to the Rotablade Stubby is the connector which can be used to stack a few Stubbys if you can afford more than one. The connector stands up and you can spin the Stubbys while they’re stacked, creating cool patterns.

The Stubby has been universally praised for the near-silence it emits when you spin it. The pricier spinners pride themselves on offering a quieter spinning experience than the low-cost products on sale, but none have achieved it in the way that the Stubby has. You really could use this toy anywhere and not get on anybody’s nerves – in fact, you’ll barely hear it yourself!

The stacking connector is more of a novelty product and there’s not too much reason to buy more than the one Stubby, but if you do decide to buy a few – perhaps one of each metal – then there’s no denying that it does its job well, showcasing the Stubbys and keeping them all together. But on the flipside, the overall appeal of fidget spinners is that they’re small and comparatively light, so taking a few out and about with you kind of defeats the object.

You can also buy a desk stand to go with your Stubby which is perhaps more appealing than the connector is. As well as doubling up as a cigar stand, the desk stand, when used to hold Stubbys, can still facilitate spinning too.

However, desk spinning is more of a dream than a reality, given that if you’re in a desk environment you probably aren’t able to make a lot of noise. The spinning reverberates when you’re spinning with the desk stand, through the desks, resulting in an annoying, and rather loud noise.

The Rotablade Stubby does have one snag, but it’s far from a unique one. Cleaning fidget spinners is the only thing holding them back right now, but EME Tools have failed to come up with a way of preventing dirt and lint from getting inside the bearings, causing friction and slowing them down. The problems aren’t awful, but loud grittiness does occur when dirty, to around the same extent that these issues are apparent with the Torqbar.

 

It’s pretty easy to clean your Rotablade Stubby, and you should carry out the process about once a week if you use your spinner on a regular basis. EME Tools, aware that grit is an issue, have compiled their own guide as to how to clean your Stubby. Either soak it in warm water or rub in alcohol, concentrating on getting right into the bearings. Once washed or sprayed, towel your Stubby dry and use compressed air to get to the tricky bits. Perhaps put your Stubby in an airing cupboard to get rid of any excess moisture.

If you are concerned about grit affecting performance and damaging the internals of your Stubby, free to clean it more often – but try not to get too paranoid otherwise you will be afraid of using your spinner, in fear of damaging it.

Ultimately, there’s a lot more to love about the Rotablade Stubby than to dislike. It’s easy to be critical of fidget spinners, but they all have their flaws and the Stubby has far fewer than most. A good-looking, effective spinner with funky additions like the connector and desk stand combine to offer maybe the most complete fidget spinning experience money can buy.

 

 

 

Posted on

Cleaning and Fixing your Fidget Spinner

If you have a fidget spinner you’ll know just how satisfying they can be and just how good a toy they can be to pass the time. However, over time, you may find that your finger spinner loses its edge a bit, and that you need to either give it a good clean or make some running repairs to get it back working at maximum speed. These tips will get you on your way.

 

How to Clean
When you first buy your fidget spinner, the first thing you appreciate is just how quickly it spins. But with use comes wear and tear and the speed will begin to deteriorate, which also means it won’t spin for anywhere near the same length of time – you won’t notice it from use to use, but over an extended period it makes a big difference.

This is usua
lly caused by a build-up of dirt, grease or other particles, and it’s essential that you keep it from accumulating, as it will be harder to clean out if you don’t. Perhaps the most effective way of cleaning the bearing in your fidget spinner is to saturate it in warm water and soap, allowing it to soak – mixing in some citrusy juice can be helpful too. Once soaked for 15 minutes or so, thoroughly dry your bearing and give it a spin. If your spinner still isn’t at optimum speed, repeat the process.

Rubbing in lubricant is another great way of cleaning your finger spinners. However, while lubricants are a good way of speeding up your spinner, as perhaps you would expect, you have to be careful which ones you use, as the bearing is going to be in contact with your skin often and you don’t want it to be an irritant. Hence, use water-based lubricants to clean your fidget spinner.

 

How to Repair
Repairing your finger spinner is sometimes a more time-consuming process. A general fault is your bearing becoming loose – for your spinner to work properly, there needs to be a tight fit. Try adding a little tape to the bearing if you have this problem, some experimentation may be required.

If your fidget spinner has always been slow, then it’s probably not dirty but needs to be loosened up. A good way to do this is to soak your bearing in a harsher substance such as paint thinner as a lubricant. This will reduce the friction inside the finger spinner and enable you to get the most out of your toy. Lubricants work because they help to separate the metals within the bearing so that they do not touch each other.

Depending on which fidget spinner you buy, your product may come with a warranty, so be certain to exercise that if you have the chance.

To eliminate, or at least reduce the repairs you have to make, ensure you purchase a high-quality finger spinner in the first place which has received great reviews – the initial investment will pay dividends in the long run.

Posted on

What Types of Fidget Spinners are there?

Not all fidget spinners are made equally. While they all ultimately serve the same purpose, different finger spinners use different materials, for both the spinner and the bearing. These materials have their advantages and disadvantages, and hence come at different costs. Let’s assess the qualities of these materials, and determine which are best.

Fidget toys started off as a crowd-funded project and now there are a few companies are taking them really seriously and producing some high-quality products. One of the leaders in the industry are Torqbar, who make a variety of metal spinners – currently they sell steel, titanium, copper and brass spinners. Fidget spinners made out of these materials are superior to their counterparts for a few reasons. Firstly, they operate super quietly, so you can happily play with them anywhere.

 

They are also very equally balanced which helps them to spin more smoothly and for longer. In addition, the bearings inside of the Torqbar spinners are placed very specifically to ensure they spin freely and don’t slow down over time.

The design is undoubtedly going to be a key part of your decision when it comes to choosing a fidget spinner and, while picking the spinner with the best-performing materials is important, there shouldn’t be an exact science in your choice – you should like the look of your spinner and enjoy holding it since you’re going to be fidgeting with it a lot.

 

Many of the mid-priced fidget spinners on sale are made out of wood. From an aesthetical perspective, these are possibly the classiest and most professional looking of all fidget spinners – they make a nice addition to an office desk. They have solid usability – tending to be lighter than the metal models – and, providing they are taken care of, offer good spinning time. Moreover, like metal spinners, wooden fidget spinners are long-lasting devices.

Fidget spinners come in a few different designs, with anywhere from one to three bearings in a spinner commonplace. It’s purely personal preference, but do remember that you may have a bit more trouble spinning spinners with more bearings, simply because the toy is bigger – it’s especially worth remembering this if you have small hands.

 

Many of the cheaper fidget spinners on the market are 3D printed and made out of classic. These are popular because they are cheaper than many other of the fidget spinners out there. However, what you make up for in price, you can lose out a little bit in quality. 3D printed fidget spinners tend to be a little louder than others and aren’t quite as durable. That said, they are the perfect type of spinner for people who want a route into fidget spinning, before spending more on a top-of-the-range spinner.

 

Fidget spinners are still a fresh concept so expect to see much progress in their designs in the future. Since going on sale, they have garnered broad and positive appeal, with nearly everyone who gets one admitting how addictive and fun they are.